Tools You’ll Need

• Screwdriver (usually Phillips head)
• Optional: Penetrating oil for rusty screws
• Soft cloth to protect your car’s paint

Step 1: Locate and Inspect Screws

Identify the screws holding your license plate frame in place. Check if they’re rusty or stuck; if so, apply penetrating oil and wait a few minutes.

Step 2: Unscrew Carefully

Use the screwdriver to slowly remove the screws. Keep a firm grip to avoid slipping and scratching your car’s paint.

Step 3: Remove the Frame

Once screws are out, gently pull the frame away from the plate. If it sticks, wiggle slightly until it releases.

Step 4: Inspect and Clean

Check the plate and car surface for any damage or dirt. Clean gently with a soft cloth if needed.

Need a New Frame? Check Out Stickeey

Upgrade with Stickeey’s stylish and legal license plate frames designed for easy installation and perfect fit.

Final Advice

Always handle screws with care to avoid stripping. If screws are too rusted, consider replacement for your next install.